MTL1 magnetostrictive displacement sensor of general cylinder built-in magnetostrictive displacement sensor series, effective stroke 75mm ~ 4500mm, both ends of buffer stroke defined by the customer. Voltage, current, RS485 output. The built-in imported waveguide wire by DSP as measurement unit, digital signal processing, high precision, no temperature drift, no contact, life is twenty years; measuring high temperature of 300C DEG, corrosion resistance, pressure up to 64MPa, can be used in most of the oil cylinder displacement measurement applications.
Description: MTL1 for our products on the division, is a new generation of products MTL3 can be completely replaced, can refer to MTL3.
Detailed parameters:
★ Stroke Range(mm)80~5000mm
★ Power Supply: +11VDC〜+36VDC
★ Output mode / voltage analog signal:4〜20mADC、0〜5VDC、1〜5VDC、0〜10VDC(+15VDC〜+36VDC)
digital signal:RS485
★ Load capacity:Voltage signal output load≥1KΩ Current signal output load≤1KΩ
★ Nonlinear error: + 0.05%FS; 200mm maximum error below 100μm
★ Repeatability error: better than 0.005%FS
★Resolution: better than 0.005%FS
★ Hysteresis: better than 0.002%FS
★ Working temperature:0〜+70℃ -15〜+60℃ -25〜+70℃ -40〜+85℃
★ Rod material: 0Cr18Ni9 (304) of 316 stainless steel (customized)
★ Electronic warehouse shell material: 0Cr18Ni9 (304) 316 stainless steel (special custom)
★ Lead: PVC shield cable (the default length: 1m, can also be provided according to user requirements) aviation plug (not applicable to explosion-proof terminal products)
★ Shell protection class:IP67