MTL floating ball type magnetostrictive liquid level sensor, also known as float level gauge, ball float type liquid level meter, is a sensor to measure the oil level and the water level. The effective travel is 80mm ~ 3000mm, the lower end of the 30mm buffer stroke, the upper buffer stroke according to customer needs. There are voltage, current, RS485 output. The built-in imported waveguide wire by DSP as measurement unit, digital signal processing, high precision, no temperature drift, no contact, life is twenty years; measuring high temperature 300C degrees, pressure resistant, float voltage 1.5MPa.
MTL floating ball type liquid level sensor detail parameters:
1.Effective stroke specification(mm):80~3000mm;
2.Mechanical stroke(mm):有效行程+客户需要;
3.output mode:0~5V DC、0~10V DC、4~20mA DC、RS485;
4.Outlet type: direct outlet, five core aviation plug,Explosion proof outlet;
5.Linear accuracy:≤0.05%FS;
6.Repeatability:≤0.0005%FS;
7.Hysteresis:≤0.001%FS;
8.Resolution:≤0.001%FS;
9.Protection level:IP67、IP68(Optional);
10.Working voltage:+15VDC~24VDC;
11.Working current: digital output voltage and current output type less than 16mA, less than 35mA;
12.Use temperature range:-20~125℃;
13.Vibration test: 3G, 25Hz GB/T2423.10 continuous impact test: 10g, 100Hz GB/T2423.5;
14.Insulation resistance: insulation resistance than 10M ohm sensor power supply terminal and the ground terminal of the GB/T15479-1995 symbol
15.Working pressure: continuous working pressure 35Mpa