I. Overview of tension sensor:
Miran technology tension sensor uses strain gauge to form Wheatstone bridge inside the sensor. When the sensor is subjected to external force, it will produce deformation, causing the strain gauge impedance close to the sensor inside to linearly increase or decrease. Through the transmitter the mechanical quantity can be converted into a standard 4-20mA, 0-5V, 0-10V and other analog signals directly connected with automatic control equipment PLC or computer.
Milang technology tension sensor adopts alloy steel material, high stability, easy installation, signal stability and anti-interference, can install different specifications of pulley.
II. Tension sensor application range:
Widely used in fiber, yarn, cable, tape and other kinds of wire production equipment, used for dynamic measurement of tension.
III. Tension sensor technical parameters:
Measuring range | 20-300N |
Sensitivity | 2.0±0.1mv/V | Impedance | 350Ω |
Comprehensive precision | ±0.1%FS | Insulation resistance | ≥5000MΩ |
Non linearity | ±0.1%FS | Working temperature | -20~+80℃ |
Hysteresis error | ±0.1%FS | Ultimate overload | 200%R.C |
Repeatability error | ±0.1%FS | Safety overload | 150%R.C |
Zero temperature coefficient | ±0.05%FS/10℃ | Material | Alloy steel |
Creep | ±0.1%FS/30min | Working voltage | +12-24VDC |
IV. Tension sensor connection mode:
Red line: Power supply +12-24VDC
Black cable: Power supply minus 0V
Green line: signal output
Shielded cable: connects to ground GND
V. Model selection:
VI. Installation dimension: