The reason and the result of the wire rope breaking of the rope displacement sensor
The wire rope of the wire rope position sensor on the site is broken. For such a situation, the editor of the displacement sensor manufacturer MIRAN has sorted out the reasons for the wire rope of the wire rope displacement sensor and the results. I hope that in the selection, customers can make fewer detours and reduce Cost loss.
The main reasons for the wire rope breaking of the rope displacement sensor are as follows:
1. The range is not enough.
The wire rope was severely broken because of the insufficient range. And because of the excessive tension, the wire rope bounced back, breaking the potentiometer and spring components.
2. Damage to the working environment.
Any product is damaged in use. If the wire rope is operated in a harsh environment, worn, squeezed, bent and other abnormal use, it is more likely to cause the wire rope to break. Of course, the quality of the wire rope also determines this. MIRAN's draw rope displacement sensors are made of high-quality imported steel wire rope, which is durable and not easy to break.
3. The installation angle is wrong.
In the operation of the rope displacement sensor, the angle deviation of the wire rope is too large, and over time, the service life of the wire rope will be greatly reduced. Therefore, customers need to focus on this issue when installing.
4. The configured adapter is incorrect.
If the equipment needs to be rotated without a universal adapter, it is easy to twist the wire rope.
The wire rope of the pull rope displacement sensor is broken. If the pulling force is not large, it is okay to repair the wire rope by replacing it. However, if the pulling force is large, other components may be damaged, and the potentiometer needs to be replaced, so the cost is much higher. In short, when choosing a model, the customer should explain his needs in detail as much as possible.